Tips

Pegs

Pegs

The stakes are used to delimit the points where the pipes and sprinklers of the underground irrigation system will be positioned. These are accessories that are not fundamental within the system, but very useful in the construction phase, since they are used to identify the holes where the main elements of the system will have to be positioned.

Features


The pegs are shaped like rods formed by a pointed base and a curved handle or a head similar to that of the nail. All the pegs end with a point which must be inserted on the ground and on the lawn and which must mark the points where the excavations will be carried out. In fact, in the underground system it would be very difficult to identify the points of the excavation without resorting to the use of these very important accessories. In the upper part of the handle, or on the sides, the pegs are formed by grooves that also allow you to fix the sprinklers and the pipes of the system and to test their proper functioning before final burying. The dimensions of these posts vary according to the pipes to be installed. We will therefore have pegs with a small diameter, useful for fixing and testing thirteen or sixteen millimeter pipes, but also those with larger diameter, useful for fixing larger pipes. The stakes allow, in fact, to install both the main pipes (collectors) and the secondary ones of the system (capillary pipes). They are also indispensable for marking the areas where the sprinklers will be placed. Without stakes, the installation of the pipes and sprinklers would happen at random, not guaranteeing the correct functioning of the system. The pegs can be made of either wood or heat-resistant plastic. They are generally a maximum of one meter high. also indispensable for marking the areas where the sprinklers will be placed. Without stakes, the installation of the pipes and sprinklers would happen at random, not guaranteeing the correct functioning of the system. The pegs can be made of either wood or heat-resistant plastic. They are generally a maximum of one meter high. also indispensable for marking the areas where the sprinklers will be placed. Without stakes, the installation of the pipes and sprinklers would happen at random, not guaranteeing the correct functioning of the system. The pegs can be made of either wood or heat-resistant plastic. They are generally a maximum of one meter high.

Use


The pegs are sold together with a lanyard which will be used to trace the path of the pipes. Then, the lanyard will mark “the way” of the pipes, while the pegs will mark the exact points of the sprinkler placement. The pegs can be used both on the lawn and on the ground. The pointed base easily penetrates into the soil, showing very evident signs on which excavations will then have to be carried out. Sometimes, instead of the wire, you can use plaster that will mark the path of the pipes starting from the first stake that is fixed on the ground up to the last. The pegs must mark the entire surface that will house the sprinklers and pipes. In some cases, these posts can also be used to support other elements of the irrigation system. This does not happen in the case of underground irrigation, but in drip irrigation and in micro-irrigation, where the stakes act as a support for the sprinklers and pipes. By fixing the latter to the poles, you will have the possibility to reach plants of any height and to irrigate them correctly and with the right level of water. The stakes for external installations are, in fact, called support stakes. In external irrigation, the stakes are frequently made of wood, in order to blend in and harmonize with the cultivated plants. The support stakes are also used on the terrace, for the irrigation of potted plants. Sometimes, and always in drip irrigation, the stakes can be directly incorporated into the drippers. where the pegs serve as support for the sprinklers and pipes. By fixing the latter to the poles, you will have the possibility to reach plants of any height and to irrigate them correctly and with the right level of water. The stakes for external installations are, in fact, called support stakes. In external irrigation, the stakes are frequently made of wood, in order to blend in and harmonize with the cultivated plants. The support stakes are also used on the terrace, for the irrigation of potted plants. Sometimes, and always in drip irrigation, the stakes can be directly incorporated into the drippers. where the pegs serve as support for the sprinklers and pipes. By fixing the latter to the poles, you will have the possibility to reach plants of any height and to irrigate them correctly and with the right level of water. The stakes for external installations are, in fact, called support stakes. In external irrigation, the stakes are frequently made of wood, in order to blend in and harmonize with the cultivated plants. The support stakes are also used on the terrace, for the irrigation of potted plants. Sometimes, and always in drip irrigation, the stakes can be directly incorporated into the drippers. you will have the possibility to reach plants of any height and to irrigate them correctly and with the right level of water. The stakes for external installations are, in fact, called support stakes. In external irrigation, the stakes are frequently made of wood, in order to blend in and harmonize with the cultivated plants. The support stakes are also used on the terrace, for the irrigation of potted plants. Sometimes, and always in drip irrigation, the stakes can be directly incorporated into the drippers. you will have the possibility to reach plants of any height and to irrigate them correctly and with the right level of water. The stakes for external installations are, in fact, called support stakes. In external irrigation, the stakes are frequently made of wood, in order to blend in and harmonize with the cultivated plants. The support stakes are also used on the terrace, for the irrigation of potted plants. Sometimes, and always in drip irrigation, the stakes can be directly incorporated into the drippers. for the irrigation of potted plants. Sometimes, and always in drip irrigation, the stakes can be directly incorporated into the drippers. for the irrigation of potted plants. Sometimes, and always in drip irrigation, the stakes can be directly incorporated into the drippers.

Pegs with dripper


The drippers are used in drip irrigation, to get the water to the base of the plants. These devices are often mounted on pegs which become an integral and fundamental part of the system. The drippers are placed at the head of the stake and are placed at the ends of the capillary tube. The support pegs for drippers are made of plastic material, while the micro-sprinkler, also called sprinkler, will be formed by an internal silicone membrane that prevents the formation of limescale. Spike drippers have an adjustable flow rate ranging from zero to forty liters per hour. The dripper can be easily removed from the stake, in order to carry out periodic cleaning of the device.

Related posts

Deja una respuesta

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

Botón volver arriba